View PBA75F-24_8020570.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

model pba10f-5 pba10f-12 pba10f-24 max output wattage[w] 10 10.8 12 dc output 5v 2a 12v 0.9a 24v 0.5a specifications model pba10f-5 pba10f-12 pba10f-24 input voltage[v] ac85 - 264 1 f or dc110 - 370 ( ac50 or dc70 please refer to the instruction manual 2.1 input voltage * 3 ) current[a] acin 100v 0.30typ ( io=100% ) acin 200v 0.20typ ( io=100% ) frequency[hz] 50/60 ( 47 - 440 ) or dc efficiency[%] acin 100v 74typ 76typ 77typ acin 200v 74typ 76typ 77typ inrush current[a] acin 100v 15typ ( io=100% ) acin 200v 30typ ( io=100% ) leakage current[ma] 0.15/0.30max ( acin 100v/240v 60hz , io=100% , according to iec60950-1 , denan ) output voltage[v] 51224 current[a] 2 0.9 0.5 line regulation[mv] 20max 48max 96max load regulation[mv] 40max 100max 150max ripple[mvp-p] 0to+50 c * 1 80max 120max 120max -10-0 c * 1 * 6 * 6 140max 160max 160max ripple noise[mvp-p] 0to+50 c * 1 120max 150max 150max -10-0 c * 1 160max 180max 180max temperature regulation[mv] 0to+50 c 50max 120max 240max -10 to +50 c 60max 150max 290max drift[mv] * 2 20max 48max 96max start-up time[ms] 200typ ( acin 100v , io=100% ) * start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage. hold-up time[ms] 20typ ( acin 100v , io=100% ) output voltage adjustment range[v] 4.50 - 5.50 10.0 - 13.2 19.2 - 27.0 output voltage setting[v] 5.00 - 5.15 12.00 - 12.48 24.00 - 24.96 protection circuit and others overcurrent protection works over 105% of rated current and recovers automatically overvoltage protection[v] 5.75 - 7.00 15.0 - 18.0 30.0 - 37.0 operating indication led ( green ) remote on/off none isolation input-output ac3 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) input-fg ac2 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) output-fg ac500v 1minute , cutoff current = 25ma , dc500v 50m w min ( at room temperature ) environment operating temp. , humid.and altitude -10 to +71 c ( required derating ), 20 - 90%rh ( non condensing ) 3 , 000m ( 10 , 000feet ) max storage temp. , humid.and altitude -20 to +75 c , 20 - 90%rh ( non condensing ) 9 , 000m ( 30 , 000feet ) max vibration 10 - 55hz , 19.6m/s 2 ( 2g ), 3minutes period , 60minutes each along x , y and z axis impact 196.1m/s 2 ( 20g ), 11ms , once each x , y and z axis safety and noise regulations agency approvals ( at only ac input ) ul60950-1 , c-ul ( csa60950-1 ), en60950-1 , en50178 complies with den-an conducted noise complies with fcc part15 classb , vcci-b , cispr22-b , en55011-b , en55022-b harmonic attenuator complies with iec61000-3-2 ( not built-in to active filter * 4 ) others case size/weight 31 x 78 x 68mm [1.22 x 3.07 x 2.68 inches] ( without terminal block )( w x h x d ) / 150g max ( without cover ) cooling method convection * 7 * 1 measured by 20mhz oscilloscope or ripple-noise meter(equivalent to keisoku-giken :rm101). * 2 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c . * 3 derating is required. * 4 when two or more units are used,they may not comply with the harmonic attenuator. please contact us for details. * 5 please contact us about safety approvals for the model with option. * 6 please contact us about dynamic load and input response. * 7 please contact us about class c. * parallel operation with other model is not possible. * derating is required when operated with cover. * a sound may occur from power supply at peak loading. pba10f ac-dc power supplies enclosed type pb a 10 f - o - o ordering information 1 series name 2 single output 3 output wattage 4 universal input 5 output voltage 6 optional * 5 c :with coating g :low leakage current e :low leakage current and emi class a t :vertical terminal block j :connector type n :with cover (ul508 is acquired) n1 :with din rail v :output voltage setting potentiometer external- ly r 123456 pba/pbw pba/pbw-2 recommended emi/emc filter nac-06-472 high voltage pulse noise type : nap series low leakage current type : nam series * the emi/emc filter is recommended * to connect with several devices. cover is optional
2.5 cover name plate cover (option) name plate m3 mounting hole 2-m3 mounting hole 2-m3 ac(n) ac(l) fg -v +v terminal cover point a:c102 68 34.5 78 15.1 1.5 7.5 9.5 49.5 0.5 36 0.5 16.5 2 31 18 11 34.5 4 22.6 1.5 11.5 18 [0.71] [0.65] [2.68] [1.95] [1.42] [0.43] [0.16] [0.59] [0.89] [0.1] [0.48] 12.2 1.5 70.5 [2.78] [0.3] [0.37] [1.36] [1.36] [1.22] [0.71] [3.07] [0.45] pba10f led voltage adjust ? tolerance : 1 [ 0.04] ? weight : 150g max (without cover) ? pcb material/thickness : cem3 / 1.6mm [0.06] ? chassis material : electric galvanizing steel board ? dimensions in mm, [ ]= inches ? mounting torque : 0.6n ? m(6.3kgf ? cm)max ? screw tightening torque : m3 0.8n ? m(8.5kgf ? cm)max ? please connect safety ground to the unit in 2-m3 holes. ? external size of option t,j,n,n1 and v is different from standard model and refer to 7 option of instruction manual for detail s. pba/pbw pba/pbw-3 pba10f block diagram 2.5a ac250v noise filter inverter control current sensing rectifier and filter control ac in dc out fg photocoupler photocoupler transformer 85 - 264v inrush current limit fuse over voltage protection rectifier and filter external view
model pba15f-3r3 pba15f-5 pba15f-9 pba15f-12 pba15f-15 pba15f-24 pba15f-48 max output wattage[w] 9.9 15 15.3 15.6 15 16.8 16.8 dc output 3.3v 3a 5v 3a 9v 1.7a 12v 1.3a 15v 1a 24v 0.7a 48v 0.35a specifications model pba15f-3r3 pba15f-5 pba15f-9 pba15f-12 pba15f-15 pba15f-24 pba15f-48 input voltage[v] ac85 - 264 1 f or dc110 - 370 ( ac50 or dc70 please refer to the instruction manual 2.1 input voltage * 3 ) current[a] acin 100v 0.30typ ( io=100% ) 0.4typ ( io=100% ) acin 200v 0.15typ ( io=100% ) 0.2typ ( io=100% ) frequency[hz] 50/60 ( 47 - 440 ) or dc efficiency[%] acin 100v 68typ 74typ 75typ 75typ 77typ 75typ 75typ acin 200v 68typ 75typ 77typ 78typ 80typ 78typ 78typ inrush current[a] acin 100v 15typ ( io=100% )( at cold start ) acin 200v 30typ ( io=100% )( at cold start ) leakage current[ma] 0.15/0.30max ( acin 100v/240v 60hz , io=100% , according to iec60950-1 , denan ) output voltage[v] 3.35 9 12152448 current[a] 3 3 1.7 1.3 1 0.7 0.35 line regulation[mv] 20max 20max 36max 48max 60max 96max 192max load regulation[mv] 40max 40max 100max 100max 120max 150max 240max ripple[mvp-p] 0to+50 c * 1 80max 80max 120max 120max 120max 120max 150max -10-0 c * 1 * 6 * 6 140max 140max 160max 160max 160max 160max 200max ripple noise[mvp-p] 0to+50 c * 1 120max 120max 150max 150max 150max 150max 250max -10-0 c * 1 160max 160max 180max 180max 180max 180max 300max temperature regulation[mv] 0to+50 c 50max 50max 90max 120max 150max 240max 480max -10 to +50 c 60max 60max 120max 150max 180max 290max 600max drift[mv] * 2 20max 20max 36max 48max 60max 96max 192max start-up time[ms] 200typ ( acin 100v , io=100% ) * start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage. hold-up time[ms] 20typ ( acin 100v , io=100% ) output voltage adjustment range[v] 2.85 - 3.60 4.50 - 5.50 7.50 - 10.0 10.0 - 13.2 13.2 - 18.0 19.2 - 27.0 39.0 - 53.0 output voltage setting[v] 3.30 - 3.40 5.00 - 5.15 9.00 - 9.36 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 48.00 - 49.92 protection circuit and others overcurrent protection works over 105% of rated current and recovers automatically overvoltage protection[v] 4.00 - 5.25 5.75 - 7.00 11.5 - 14.0 15.0 - 18.0 20.0 - 25.0 30.0 - 37.0 58.0 - 65.0 operating indication led ( green ) remote on/off none isolation input-output ac3 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) input-fg ac2 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) output-fg ac500v 1minute , cutoff current = 25ma , dc500v 50m w min ( at room temperature ) environment operating temp. , humid.and altitude -10 to +71 c ( required derating ), 20 - 90%rh ( non condensing ) 3 , 000m ( 10 , 000feet ) max storage temp. , humid.and altitude -20 to +75 c , 20 - 90%rh ( non condensing ) 9 , 000m ( 30 , 000feet ) max vibration 10 - 55hz , 19.6m/s 2 ( 2g ), 3minutes period , 60minutes each along x , y and z axis impact 196.1m/s 2 ( 20g ), 11ms , once each x , y and z axis safety and noise regulations agency approvals ( at only ac input ) ul60950-1 , c-ul ( csa60950-1 ), en60950-1 , en50178 complies with den-an conducted noise complies with fcc part15 classb , vcci-b , cispr22-b , en55011-b , en55022-b harmonic attenuator complies with iec61000-3-2 ( not built-in to active filter * 4 ) others case size/weight 31 x 78 x 85mm [1.22 x 3.07 x 3.35 inches] ( without terminal block )( w x h x d ) / 200g max ( without cover ) cooling method convection * 7 * 1 measured by 20mhz oscilloscope or ripple-noise meter(equivalent to keisoku-giken :rm101). * 2 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c . * 3 derating is required. * 4 when two or more units are used,they may not comply with the harmonic attenuator. please contact us for details. * 5 please contact us about safety approvals for the model with option. * 6 please contact us about dynamic load and input response. * 7 please contact us about class c. * parallel operation with other model is not possible. * derating is required when operated with cover. * a sound may occur from power supply at peak loading. pba15f ac-dc power supplies enclosed type pb a 15 f - o - o ordering information 1 series name 2 single output 3 output wattage 4 universal input 5 output voltage 6 optional * 5 c :with coating g :low leakage current e :low leakage current and emi class a t :vertical terminal block j :connector type n :with cover (ul508 is acquired [5v, 12v, 24v]) n1 :with din rail v :output voltage setting potentiometer external- ly r 123456 pba/pbw pba/pbw-4 recommended emi/emc filter nac-06-472 high voltage pulse noise type : nap series low leakage current type : nam series * the emi/emc filter is recommended * to connect with several devices. cover is optional
2.5 point a:c102 cover (option) name plate m3 mounting hole 2-m3 mounting hole 2-m3 ac(n) ac(l) fg -v +v terminal cover 15.1 1.5 5 18 31 34.5 34.5 78 36.5 11.5 85 16.5 2 70.5 12.2 1.5 18 22.6 1.5 31 0.5 60 0.5 9.5 7.5 pba15f pbw15f led voltage adjust cover name plate ? tolerance : 1 [ 0.04] ? weight : 200g max (without cover) ? pcb material/thickness : cem3 / 1.6mm [0.06] ? chassis material : electric galvanizing steel board ? dimensions in mm, [ ]= inches ? mounting torque : 0.6n ? m(6.3kgf ? cm)max ? screw tightening torque : m3 0.8n ? m(8.5kgf ? cm)max ? please connect safety ground to the unit in 2-m3 holes. ? external size of option t,j,n,n1 and v is different from standard model and refer to 7 option of instruction manual for detail s. [0.71] [0.65] [3.35] [1.22] [2.36] [0.2] [1.44] [0.59] [0.89] [0.1] [0.48] [2.78] [0.3] [0.37] [1.36] [1.36] [1.22] [0.71] [3.07] [0.45] pba/pbw pba/pbw-5 pba15f block diagram 2.5a ac250v ac in dc out fg 85 - 264v noise filter inverter control current sensing rectifier and filter control photocoupler photocoupler transformer inrush current limit fuse over voltage protection rectifier and filter external view
model pba30f-3r3 pba30f-5 pba30f-9 pba30f-12 pba30f-15 pba30f-24 pba30f-48 max output wattage[w] 19.8 30 30.6 30 30 31.2 31.2 dc output 3.3v 6a 5v 6a 9v 3.4a 12v 2.5a 15v 2a 24v 1.3a 48v 0.65a specifications model pba30f-3r3 pba30f-5 pba30f-9 pba30f-12 pba30f-15 pba30f-24 pba30f-48 input voltage[v] ac85 - 264 1 f or dc110 - 370 ( ac50 or dc70 please refer to the instruction manual 2.1 input voltage * 3 ) current[a] acin 100v 0.50typ ( io=100% ) 0.70typ ( io=100% ) acin 200v 0.30typ ( io=100% ) 0.40typ ( io=100% ) frequency[hz] 50/60 ( 47 - 440 ) or dc efficiency[%] acin 100v 68typ 74typ 75typ 76typ 78typ 78typ 79typ acin 200v 69typ 77typ 77typ 78typ 81typ 81typ 81typ inrush current[a] acin 100v 15typ ( io=100% )( at cold start ) acin 200v 30typ ( io=100% )( at cold start ) leakage current[ma] 0.30/0.65max ( acin 100v/240v 60hz , io=100% , according to iec60950-1 , denan ) output voltage[v] 3.35 9 12152448 current[a] 6 6 3.4 2.5 2 1.3 0.65 line regulation[mv] 20max 20max 36max 48max 60max 96max 192max load regulation[mv] 40max 40max 100max 100max 120max 150max 240max ripple[mvp-p] 0to+50 c * 1 80max 80max 120max 120max 120max 120max 150max -10-0 c * 1 * 6 * 6 140max 140max 160max 160max 160max 160max 200max ripple noise[mvp-p] 0to+50 c * 1 120max 120max 150max 150max 150max 150max 250max -10-0 c * 1 160max 160max 180max 180max 180max 180max 300max temperature regulation[mv] 0to+50 c 50max 50max 90max 120max 150max 240max 480max -10 to +50 c 60max 60max 120max 150max 180max 290max 600max drift[mv] * 2 20max 20max 36max 48max 60max 96max 192max start-up time[ms] 200typ ( acin 100v , io=100% ) * start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage. hold-up time[ms] 20typ ( acin 100v , io=100% ) output voltage adjustment range[v] 2.85 - 3.60 4.50 - 5.50 7.50 - 10.0 10.0 - 13.2 13.2 - 18.0 19.2 - 27.0 39.0 - 53.0 output voltage setting[v] 3.30 - 3.40 5.00 - 5.15 9.00 - 9.36 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 48.00 - 49.92 protection circuit and others overcurrent protection works over 105% of rated current and recovers automatically overvoltage protection[v] 4.00 - 5.25 5.75 - 7.00 11.5 - 14.0 15.0 - 18.0 20.0 - 25.0 30.0 - 37.0 58.0 - 65.0 operating indication led ( green ) remote on/off none isolation input-output ac3 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) input-fg ac2 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) output-fg ac500v 1minute , cutoff current = 25ma , dc500v 50m w min ( at room temperature ) environment operating temp. , humid.and altitude -10 to +71 c ( required derating ), 20 - 90%rh ( non condensing ) 3 , 000m ( 10 , 000feet ) max storage temp. , humid.and altitude -20 to +75 c , 20 - 90%rh ( non condensing ) 9 , 000m ( 30 , 000feet ) max vibration 10 - 55hz , 19.6m/s 2 ( 2g ), 3minutes period , 60minutes each along x , y and z axis impact 196.1m/s 2 ( 20g ), 11ms , once each x , y and z axis safety and noise regulations agency approvals ( at only ac input ) ul60950-1 , c-ul ( csa60950-1 ), en60950-1 , en50178 complies with den-an conducted noise complies with fcc part15 classb , vcci-b , cispr22-b , en55011-b , en55022-b harmonic attenuator complies with iec61000-3-2 ( not built-in to active filter * 4 ) others case size/weight 31 x 78 x 103mm [1.22 x 3.07 x 4.06 inches] ( without terminal block )( w x h x d ) / 270g max ( without cover ) cooling method convection * 7 * 1 measured by 20mhz oscilloscope or ripple-noise meter(equivalent to keisoku-giken :rm101). * 2 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c . * 3 derating is required. * 4 when two or more units are used,they may not comply with the harmonic attenuator. please contact us for details. * 5 please contact us about safety approvals for the model with option. * 6 please contact us about dynamic load and input response. * 7 please contact us about class c. * parallel operation with other model is not possible. * derating is required when operated with cover. * a sound may occur from power supply at peak loading. pba30f ac-dc power supplies enclosed type pb a 30 f - o - o ordering information 1 series name 2 single output 3 output wattage 4 universal input 5 output voltage 6 optional * 5 c :with coating g :low leakage current e :low leakage current and emi class a t :vertical terminal block j :connector type n :with cover (ul508 is acquired [5v, 12v, 24v]) n1 :with din rail v :output voltage setting potentiometer external- ly r 123456 pba/pbw pba/pbw-6 recommended emi/emc filter nac-06-472 high voltage pulse noise type : nap series low leakage current type : nam series * the emi/emc filter is recommended * to connect with several devices. cover is optional
2.5 terminal cover +v -v fg ac(l) ac(n) m3 name plate cover (option) cover name plate point a:c102 2-m3 mounting hole 2-m3 mounting hole 15.1 1.5 22.6 1.5 8.5 75 0.5 40.5 46 0.5 36.5 16.5 2 11.5 9.5 7.5 18 70.5 12.2 1.5 18 78 103 31 34.5 pba30f pbw30f ? tolerance : 1 [ 0.04] ? weight : 270g max (without cover) ? pcb material/thickness : cem3 / 1.6mm [0.06] ? chassis material : electric galvanizing steel board ? dimensions in mm, [ ]= inches ? mounting torque : 0.6n ? m(6.3kgf ? cm)max ? screw tightening torque : m3 0.8n ? m(8.5kgf ? cm)max ? please connect safety ground to the unit in 2-m3 holes. ? external size of option t,j,n,n1 and v is different from standard model and refer to 7 option of instruction manual for detail s. led voltage adjust [0.71] [0.65] [4.06] [1.81] [2.95] [0.33] [1.59] [0.59] [0.89] [0.1] [0.48] [2.78] [0.3] [0.37] [1.44] [1.36] [1.22] [0.71] [3.07] [0.45] pba/pbw pba/pbw-7 pba30f block diagram 3.15a ac250v ac in dc out fg 85 - 264v noise filter inverter control current sensing rectifier and filter rectifier and filter control photocoupler photocoupler transformer inrush current limit fuse over voltage protection external view
model pba50f-3r3 pba50f-5 pba50f-9 pba50f-12 pba50f-15 pba50f-24 pba50f-36 pba50f-48 max output wattage[w] 33 50 50.4 51.6 52.5 52.8 50.4 52.8 dc output 3.3v 10a 5v 10a 9v 5.6a 12v 4.3a 15v 3.5a 24v 2.2a 36v 1.4a 48v 1.1a specifications model pba50f-3r3 pba50f-5 pba50f-9 pba50f-12 pba50f-15 pba50f-24 pba50f-36 pba50f-48 input voltage[v] ac85 - 264 1 f or dc120 - 370 ( ac50 or dc70 please refer to the instruction manual 2.1 input voltage * 4 ) current[a] acin 100v 0.5typ 0.7typ acin 200v 0.3typ 0.4typ frequency[hz] 50/60 ( 47-63 ) efficiency[%] acin 100v 75typ 80typ 79typ 80typ 81typ 82typ 83typ 83typ acin 200v 76typ 82typ 81typ 82typ 83typ 84typ 85typ 85typ power factor ( io=100% ) acin 100v 0.98typ 0.99typ acin 200v 0.87typ 0.93typ inrush current[a] acin 100v 15typ ( io=100% )( at cold start ) acin 200v 30typ ( io=100% )( at cold start ) leakage current[ma] 0.4/0.75max ( acin 100v/240v 60hz , io=100% , according to iec60950-1 , denan ) output voltage[v] 3.3 5 9 12 15 24 36 48 current[a] 10 10 5.6 4.3 3.5 2.2 1.4 1.1 line regulation[mv] 20max 20max 36max 48max 60max 96max 144max 192max load regulation[mv] 40max 40max 100max 100max 120max 150max 240max 240max ripple[mvp-p] 0to+50 c * 1 80max 80max 120max 120max 120max 120max 150max 150max -10-0 c * 1 140max 140max 160max 160max 160max 160max 200max 200max ripple noise[mvp-p] 0to+50 c * 1 120max 120max 150max 150max 150max 150max 250max 250max -10-0 c * 1 160max 160max 180max 180max 180max 180max 300max 300max temperature regulation[mv] 0to+50 c 50max 50max 90max 120max 150max 240max 360max 480max -10 to +50 c 60max 60max 120max 150max 180max 290max 450max 600max drift[mv] * 2 20max 20max 36max 48max 60max 96max 144max 192max start-up time[ms] 350typ ( acin 100v , io=100% ) hold-up time[ms] 20typ ( acin 100v , io=100% ) output voltage adjustment range[v] 2.85 - 3.63 4.00 - 5.50 7.50 - 10.0 10.0 - 13.2 13.2 - 18.0 19.2 - 27.0 28.8 - 39.6 39.0 - 53.0 output voltage setting[v] 3.30 - 3.40 5.00 - 5.15 9.00 - 9.36 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 35.00 - 37.44 48.00 - 49.92 protection circuit and others overcurrent protection works over 105% of rated current and recovers automatically overvoltage protection[v] 4.00 - 5.25 5.75 - 7.00 11.5 - 14.0 15.0 - 18.0 20.0 - 25.0 30.0 - 37.0 43.0 - 50.0 58.0 - 65.0 operating indication led ( green ) remote on/off optional ( required external power source ) isolation input-output - rc * 3 ac3 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) input-fg ac2 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) output - rc-fg * 3 ac500v 1minute , cutoff current = 100ma , dc500v 50m w min ( at room temperature ) environment operating temp. , humid.and altitude -10 to +71 c ( required derating ), 20 - 90%rh ( non condensing ) 3 , 000m ( 10 , 000feet ) max storage temp. , humid.and altitude -20 to +75 c , 20 - 90%rh ( non condensing ) 9 , 000m ( 30 , 000feet ) max vibration 10 - 55hz , 19.6m/s 2 ( 2g ), 3minutes period , 60minutes each along x , y and z axis impact 196.1m/s 2 ( 20g ), 11ms , once each x , y and z axis safety and noise regulations agency approvals ( at only ac input ) ul60950-1 , c-ul ( csa60950-1 ), en60950-1 , en50178 complies with den-an conducted noise complies with fcc part15 classb , vcci-b , cispr22-b , en55011-b , en55022-b harmonic attenuator complies with iec61000-3-2 others case size/weight 31 x 82 x 120mm [1.22 x 3.23 x 4.72 inches] ( without terminal block )( w x h x d ) / 280g max ( without cover ) cooling method convection * 6 * 1 measured by 20mhz oscilloscope or ripple-noise meter(equivalent to keisoku-giken :rm101). * 2 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c . * 3 applicable when remote on/off(optional) is added. rc is insulated with input, output and fg. * 4 derating is required. * 5 please contact us about safety approvals for the model with option. * 6 please contact us about class c. * parallel operation with other model is not possible. * derating is required when operated with cover. * a sound may occur from power supply at peak loading. pba50f ac-dc power supplies enclosed type pb a 50 f -5 - o ordering information 1 series name 2 single output 3 output wattage 4 universal input 5 output voltage 6 optional * 5 c :with coating g :low leakage current (0.15ma max / acin 240v) e :low leakage current and emi class a (0.5ma max / acin 240v) t :vertical terminal block j :connector type r :with remote on/off n :with cover (only 24v ul508 is acquired) n1 :with din rail v :output voltage setting potentiometer external- ly r 123456 pba/pbw pba/pbw-8 recommended emi/emc filter nac-06-472 high voltage pulse noise type : nap series low leakage current type : nam series * the emi/emc filter is recommended * to connect with several devices. cover is optional
pba50f a m3 2-m3 2-m3 ac(n) ac(l) -v +v 35 120 1 2 (16.5) (21.5) (14) (20) (12) 82 0.5 4 (71) 77 0.5 9.5 7.5 (11) 88 0.5 11 18 31 3.5 point a terminal cover mounting hole mounting hole voltage adjust name plate led cover (option) cn3 connector for remote on/off (option) ? tolerance : 1 [ 0.04] ? external size of option t,j,r,n,n1 and v is different from standard model and refer to 7 option of instruction manual for deta ils. ? weight : 280g max (without cover) ? pcb material/thickness : cem3 / 1.6mm [0.06] ? chassis material : aluminum ? dimensions in mm, [ ]= inches ? mounting torque : 0.49n ? m(5kgf ? cm)max ? screw tightening torque : m3 0.8n ? m(8.5kgf ? cm)max fg ? please connect safety ground to the unit in 2-m3 holes. pin no. contents 1 2 rc(+) rc(-) cn3 option (mfr : j.s.t.) connector type model b2b-xh-a mating connector (terminal) xhp-2 bxh-001t-p0.6 or sxh-001t-p0.6 barrier strip type () [0.79] [0.65] [4.72] [3.03] [0.16] [0.55] [0.85] [0.43] [2.8] [0.3] [0.37] [1.38] [3.23] [0.02] [0.47] [3.46] [0.43] [1.36] [0.71] [0.14] pba/pbw pba/pbw-9 pba50f block diagram fg inrush current limit rectifier and filter control transformer control over voltage protection dc out noise filter rectifier and filter inverter ac in 85 - 264v fuse rectifier current sensing booster inducter inverter control current sensing rc external source e option 250v2a external view
model pba75f-3r3 pba75f-5 pba75f-9 pba75f-12 pba75f-15 PBA75F-24 pba75f-36 pba75f-48 max output wattage[w] 49.5 75 75.6 75.6 75 76.8 75.6 76.8 dc output 3.3v 15a 5v 15a 9v 8.4a 12v 6.3a 15v 5a 24v 3.2a 36v 2.1a 48v 1.6a specifications model pba75f-3r3 pba75f-5 pba75f-9 pba75f-12 pba75f-15 PBA75F-24 pba75f-36 pba75f-48 input voltage[v] ac85 - 264 1 f or dc120 - 370 ( ac50 or dc70 please refer to the instruction manual 2.1 input voltage * 4 ) current[a] acin 100v 0.7typ 1.0typ acin 200v 0.4typ 0.5typ frequency[hz] 50/60 ( 47-63 ) efficiency[%] acin 100v 77typ 81typ 80typ 81typ 82typ 83typ 84typ 84typ acin 200v 78typ 83typ 82typ 83typ 84typ 85typ 86typ 86typ power factor ( io=100% ) acin 100v 0.98typ 0.99typ acin 200v 0.87typ 0.93typ inrush current[a] acin 100v 15typ ( io=100% )( at cold start ) acin 200v 30typ ( io=100% )( at cold start ) leakage current[ma] 0.4/0.75max ( acin 100v/240v 60hz , io=100% , according to iec60950-1 , denan ) output voltage[v] 3.3 5 9 12 15 24 36 48 current[a] 15 15 8.4 6.3 5 3.2 2.1 1.6 line regulation[mv] 20max 20max 36max 48max 60max 96max 144max 192max load regulation[mv] 40max 40max 100max 100max 120max 150max 240max 240max ripple[mvp-p] 0to+50 c * 1 80max 80max 120max 120max 120max 120max 150max 150max -10-0 c * 1 140max 140max 160max 160max 160max 160max 200max 200max ripple noise[mvp-p] 0to+50 c * 1 120max 120max 150max 150max 150max 150max 250max 250max -10-0 c * 1 160max 160max 180max 180max 180max 180max 300max 300max temperature regulation[mv] 0to+50 c 50max 50max 90max 120max 150max 240max 360max 480max -10 to +50 c 60max 60max 120max 150max 180max 290max 450max 600max drift[mv] * 2 20max 20max 36max 48max 60max 96max 144max 192max start-up time[ms] 350typ ( acin 100v , io=100% ) hold-up time[ms] 20typ ( acin 100v , io=100% ) output voltage adjustment range[v] 2.85 - 3.63 4.00 - 5.50 7.50 - 10.0 10.0 - 13.2 13.2 - 18.0 19.2 - 27.0 28.8 - 39.6 39.0 - 53.0 output voltage setting[v] 3.30 - 3.40 5.00 - 5.15 9.00 - 9.36 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 36.00 - 37.44 48.00 - 49.92 protection circuit and others overcurrent protection works over 105% of rated current and recovers automatically overvoltage protection[v] 4.00 - 5.25 5.75 - 7.00 11.5 - 14.0 15.0 - 18.0 20.0 - 25.0 30.0 - 37.0 43.0 - 50.0 58.0 - 65.0 operating indication led ( green ) remote on/off optional ( required external power source ) isolation input-output - rc * 3 ac3 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) input-fg ac2 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) output - rc-fg * 3 ac500v 1minute , cutoff current = 100ma , dc500v 50m w min ( at room temperature ) environment operating temp. , humid.and altitude -10 to +71 c ( required derating ), 20 - 90%rh ( non condensing ) 3 , 000m ( 10 , 000feet ) max storage temp. , humid.and altitude -20 to +75 c , 20 - 90%rh ( non condensing ) 9 , 000m ( 30 , 000feet ) max vibration 10 - 55hz , 19.6m/s 2 ( 2g ), 3minutes period , 60minutes each along x , y and z axis impact 196.1m/s 2 ( 20g ), 11ms , once each x , y and z axis safety and noise regulations agency approvals ( at only ac input ) ul60950-1 , c-ul ( csa60950-1 ), en60950-1 , en50178 complies with den-an conducted noise complies with fcc part15 classb , vcci-b , cispr22-b , en55011-b , en55022-b harmonic attenuator complies with iec61000-3-2 others case size/weight 32 x 82 x 135mm [1.26 x 3.23 x 5.31 inches] ( without terminal block )( w x h x d ) / 350g max ( without cover ) cooling method convection * 6 * 1 measured by 20mhz oscilloscope or ripple-noise meter(equivalent to keisoku-giken :rm101). * 2 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c . * 3 applicable when remote on/off(optional) is added. rc is insulated with input, output and fg. * 4 derating is required. * 5 please contact us about safety approvals for the model with option. * 6 please contact us about class c. * parallel operation with other model is not possible. * derating is required when operated with cover. * a sound may occur from power supply at peak loading. pba75f ac-dc power supplies enclosed type pb a 75 f -5 - o ordering information 1 series name 2 single output 3 output wattage 4 universal input 5 output voltage 6 optional * 5 c :with coating g :low leakage current (0.15ma max / acin 240v) e :low leakage current and emi class a (0.5ma max / acin 240v) t :vertical terminal block j :connector type r :with remote on/off n :with cover (only 24v ul508 is acquired) n1 :with din rail v :output voltage setting potentiometer external- ly r 123456 pba/pbw pba/pbw-10 recommended emi/emc filter nac-06-472 high voltage pulse noise type : nap series low leakage current type : nam series * the emi/emc filter is recommended * to connect with several devices. cover is optional
[0.79] [0.55] [0.85] [0.43] [2.8] [0.65] [5.31] [3.7] [0.16] [0.3] [0.37] [1.38] [3.23] [0.02] [0.47] [4.15] [0.35] [1.26] [0.71] [0.14] point a a terminal cover m3 mounting hole 2-m3 voltage adjust ac(n) ac(l) -v +v ? tolerance : 1 [ 0.04] ? weight : 350g max (without cover) ? pcb material/thickness : cem3 / 1.6mm [0.06] ? chassis material : aluminum ? dimensions in mm, [ ]= inches ? mounting torque : 0.49n ? m(5kgf ? cm)max ? screw tightening torque : m3 0.8n ? m(8.5kgf ? cm)max name plate 32 18 9 105.5 0.5 (16.5) 4 94 0.5 35 135 (21.5) (14) (20) (11) 82 (12) (71) 9.5 7.5 pba75f led pin no. contents 1 2 rc(+) rc(-) cn3 option (mfr : j.s.t.) connector type model b2b-xh-a mating connector (terminal) xhp-2 bxh-001t-p0.6 or sxh-001t-p0.6 barrier strip type () ? external size of option t,j,r,n,n1 and v is different from standard model and refer to 7 option of instruction manual for deta ils. 0.5 3.5 cn3 connector for remote on/off (option) cover (option) fg ? please connect safety ground to the unit in 2-m3 holes. 1 2 2-m3 mounting hole pba/pbw pba/pbw-11 pba75f block diagram fg dc out ac in 85 - 264v rc e 250v3.15a inrush current limit rectifier and filter control transformer control over voltage protection noise filter rectifier and filter inverter fuse rectifier current sensing booster inducter inverter control current sensing external source option external view
model pba100f-3r3 pba100f-5 pba100f-9 pba100f-12 pba100f-15 pba100f-24 pba100f-36 pba100f-48 max output wattage[w] 66 100 94.5 102 105 108 100.8 100.8 dc output 3.3v 20a 5v 20a 9v 10.5a 12v 8.5a 15v 7a 24v 4.5a 36v 2.8a 48v 2.1a specifications model pba100f-3r3 pba100f-5 pba100f-9 pba100f-12 pba100f-15 pba100f-24 pba100f-36 pba100f-48 input voltage[v] ac85 - 264 1 f or dc120 - 370 ( ac50 or dc70 please refer to the instruction manual 2.1 input voltage * 4 ) current[a] acin 100v 0.9typ 1.3typ acin 200v 0.5typ 0.7typ frequency[hz] 50/60 ( 47-63 ) efficiency[%] acin 100v 77typ 82typ 80typ 81typ 83typ 84typ 84typ 84typ acin 200v 79typ 84typ 82typ 83typ 86typ 86typ 86typ 86typ power factor ( io=100% ) acin 100v 0.98typ 0.99typ acin 200v 0.87typ 0.93typ inrush current[a] acin 100v 20typ ( io=100% )( at cold start ) acin 200v 40typ ( io=100% )( at cold start ) leakage current[ma] 0.4/0.75max ( acin 100v/240v 60hz , io=100% , according to iec60950-1 , denan ) output voltage[v] 3.3 5 9 12 15 24 36 48 current[a] 20 20 10.5 8.5 7 4.5 2.8 2.1 line regulation[mv] 20max 20max 36max 48max 60max 96max 144max 192max load regulation[mv] 40max 40max 100max 100max 120max 150max 240max 240max ripple[mvp-p] 0to+50 c * 1 80max 80max 120max 120max 120max 120max 150max 150max -10-0 c * 1 140max 140max 160max 160max 160max 160max 200max 200max ripple noise[mvp-p] 0to+50 c * 1 120max 120max 150max 150max 150max 150max 250max 250max -10-0 c * 1 160max 160max 180max 180max 180max 180max 300max 300max temperature regulation[mv] 0to+50 c 50max 50max 90max 120max 150max 240max 360max 480max -10 to +50 c 60max 60max 120max 150max 180max 290max 450max 600max drift[mv] * 2 20max 20max 36max 48max 60max 96max 144max 192max start-up time[ms] 350typ ( acin 100v , io=100% ) hold-up time[ms] 20typ ( acin 100v , io=100% ) output voltage adjustment range[v] 2.85 - 3.63 4.00 - 5.50 7.50 - 10.0 10.0 - 13.2 13.2 - 18.0 19.2 - 27.0 28.8 - 39.6 39.0 - 53.0 output voltage setting[v] 3.20 - 3.40 5.00 - 5.15 9.00 - 9.36 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 36.00 - 37.44 48.00 - 49.92 protection circuit and others overcurrent protection works over 105% of rated current and recovers automatically overvoltage protection[v] 4.00 - 5.25 5.75 - 7.00 11.5 - 14.0 15.0 - 18.0 20.0 - 25.0 30.0 - 37.0 43.0 - 50.0 58.0 - 65.0 operating indication led ( green ) remote sensing optional ( only -3r3 , -5 option -k ) remote on/off optional ( required external power source ) isolation input-output - rc * 3 ac3 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) input-fg ac2 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) output - rc-fg * 3 ac500v 1minute , cutoff current = 100ma , dc500v 50m w min ( at room temperature ) environment operating temp. , humid.and altitude -10 to +71 c ( required derating ), 20 - 90%rh ( non condensing ) 3 , 000m ( 10 , 000feet ) max storage temp. , humid.and altitude -20 to +75 c , 20 - 90%rh ( non condensing ) 9 , 000m ( 30 , 000feet ) max vibration 10 - 55hz , 19.6m/s 2 ( 2g ), 3minutes period , 60minutes each along x , y and z axis impact 196.1m/s 2 ( 20g ), 11ms , once each x , y and z axis safety and noise regulations agency approvals ( at only ac input ) ul60950-1 , c-ul ( csa60950-1 ), en60950-1 , en50178 complies with den-an conducted noise complies with fcc part15 classb , vcci-b , cispr22-b , en55011-b , en55022-b harmonic attenuator complies with iec61000-3-2 others case size/weight 32 x 93 x 147mm [1.26 x 3.66 x 5.79 inches] ( without terminal block )( w x h x d ) / 440g max ( without cover ) cooling method convection * 6 * 1 measured by 20mhz oscilloscope or ripple-noise meter(equivalent to keisoku-giken :rm101). * 2 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c . * 3 applicable when remote on/off(optional) is added. rc is insulated with input, output and fg. * 4 derating is required. * 5 please contact us about safety approvals for the model with option. * 6 please contact us about class c. * parallel operation with other model is not possible. * derating is required when operated with cover. * a sound may occur from power supply at peak loading. pba100f ac-dc power supplies enclosed type pb a 100 f -5 - o ordering information 1 series name 2 single output 3 output wattage 4 universal input 5 output voltage 6 optional * 5 c :with coating g :low leakage current (0.15ma max / acin 240v) e :low leakage current and emi class a (0.5ma max / acin 240v) t :vertical terminal block j :connector type (only -12,-15,-24,-36,-48) r :with remote on/off n :with cover (only 24v ul508 is acquired) n1 :with din rail v :output voltage setting potentiometer external- ly r 123456 pba/pbw pba/pbw-12 recommended emi/emc filter nac-06-472 high voltage pulse noise type : nap series low leakage current type : nam series * the emi/emc filter is recommended * to connect with several devices. cover is optional
a 3-m3 2-m3 m4 ac(n) ac(l) -v -v +v +v name plate 32 13 0.5 9.5 15 112.5 0.5 (13.5) 124 0.5 33.5 4 (11) (20) (81) (23.5) (14) 93 (10) 147 8.6 10 18 pba100f ? tolerance : 1 [ 0.04] ? weight : 440g max (without cover) ? pcb material/thickness : cem3 / 1.6mm [0.06] ? chassis material : aluminum ? dimensions in mm, [ ]= inches ? mounting torque : 0.49n ? m(5kgf ? cm)max ? mounting torque : m4:1.6n ? m(16.9kgf ? cm)max point a terminal cover mounting hole mounting hole voltage adjust led ? external size of option t,j,r,n,n1,v and k is different from standard model and refer to 7 option of instruction manual for de tails. 0.5 3.5 cn4 connector for remote sensing (option : only -3r3, -5) cn3 connector for remote on/off (option) cover (option) fg( ) ? please connect safety ground to fg terminal on the unit. 1 2 pin no. contents 1 2 rc(+) rc(-) cn3 option (mfr : j.s.t.) connector type model b2b-xh-a mating connector (terminal) xhp-2 bxh-001t-p0.6 or sxh-001t-p0.6 barrier strip type () [0.79] [0.55] [0.93] [0.43] [3.19] [0.53] [5.79] [4.88] [0.16] [0.34] [0.39] [1.32] [3.66] [0.02] [0.39] [0.71] [4.43] [0.59] [1.26] [0.51] [0.37] [0.14] pba/pbw pba/pbw-13 pba100f block diagram fg dc out ac in 85 - 264v rc e 250v3.15a inrush current limit rectifier and filter control transformer control over voltage protection noise filter rectifier and filter inverter fuse rectifier current sensing booster inducter inverter control current sensing external source option external view
model pba150f-3r3 pba150f-5 pba150f-9 pba150f-12 pba150f-15 pba150f-24 pba150f-36 pba150f-48 max output wattage[w] 99 150 150.3 156 150 156 154.8 158.4 dc output 3.3v 30a 5v 30a 9v 16.7a 12v 13a 15v 10a 24v 6.5a 36v 4.3a 48v 3.3a specifications model pba150f-3r3 pba150f-5 pba150f-9 pba150f-12 pba150f-15 pba150f-24 pba150f-36 pba150f-48 input voltage[v] ac85 - 264 1 f or dc120 - 370 ( ac50 or dc70 please refer to the instruction manual 2.1 input voltage * 4 ) current[a] acin 100v 1.3typ 2.0typ acin 200v 0.7typ 1.0typ frequency[hz] 50/60 ( 47-63 ) efficiency[%] acin 100v 80typ 83typ 82typ 83typ 84typ 85typ 85typ 85typ acin 200v 82typ 86typ 85typ 86typ 87typ 88typ 88typ 88typ power factor ( io=100% ) acin 100v 0.98typ 0.99typ acin 200v 0.87typ 0.93typ inrush current[a] acin 100v 20typ ( io=100% )( at cold start ) acin 200v 40typ ( io=100% )( at cold start ) leakage current[ma] 0.4/0.75max ( acin 100v/240v 60hz , io=100% , according to iec60950-1 , denan ) output voltage[v] 3.3 5 9 12 15 24 36 48 current[a] 30 30 16.7 13 10 6.5 4.3 3.3 line regulation[mv] 20max 20max 36max 48max 60max 96max 144max 192max load regulation[mv] 40max 40max 100max 100max 120max 150max 240max 240max ripple[mvp-p] 0to+50 c * 1 80max 80max 120max 120max 120max 120max 150max 150max -10-0 c * 1 140max 140max 160max 160max 160max 160max 200max 200max ripple noise[mvp-p] 0to+50 c * 1 120max 120max 150max 150max 150max 150max 250max 250max -10-0 c * 1 160max 160max 180max 180max 180max 180max 300max 300max temperature regulation[mv] 0to+50 c 50max 50max 90max 120max 150max 240max 360max 480max -10 to +50 c 60max 60max 120max 150max 180max 290max 450max 600max drift[mv] * 2 20max 20max 36max 48max 60max 96max 144max 192max start-up time[ms] 350typ ( acin 100v , io=100% ) hold-up time[ms] 20typ ( acin 100v , io=100% ) output voltage adjustment range[v] 2.85 - 3.63 4.00 - 5.50 7.50 - 10.0 10.0 - 13.2 13.2 - 18.0 19.2 - 27.0 28.8 - 39.6 39.0 - 53.0 output voltage setting[v] 3.30 - 3.40 5.00 - 5.15 9.00 - 9.36 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 36.00 - 37.44 48.00 - 49.92 protection circuit and others overcurrent protection works over 105% of rated current and recovers automatically overvoltage protection[v] 4.00 - 5.25 5.75 - 7.00 11.5 - 14.0 15.0 - 18.0 20.0 - 25.0 30.0 - 37.0 43.0 - 50.0 58.0 - 65.0 operating indication led ( green ) remote sensing optional ( only -3r3 , -5 option -k ) remote on/off optional ( required external power source ) isolation input-output - rc * 3 ac3 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) input-fg ac2 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) output - rc-fg * 3 ac500v 1minute , cutoff current = 100ma , dc500v 50m w min ( at room temperature ) environment operating temp. , humid.and altitude -10 to +71 c ( required derating ), 20 - 90%rh ( non condensing ) 3 , 000m ( 10 , 000feet ) max storage temp. , humid.and altitude -20 to +75 c , 20 - 90%rh ( non condensing ) 9 , 000m ( 30 , 000feet ) max vibration 10 - 55hz , 19.6m/s 2 ( 2g ), 3minutes period , 60minutes each along x , y and z axis impact 196.1m/s 2 ( 20g ), 11ms , once each x , y and z axis safety and noise regulations agency approvals ( at only ac input ) ul60950-1 , c-ul ( csa60950-1 ), en60950-1 , en50178 complies with den-an conducted noise complies with fcc part15 classb , vcci-b , cispr22-b , en55011-b , en55022-b harmonic attenuator complies with iec61000-3-2 others case size/weight 34 x 93 x 168mm [1.34 x 3.66 x 6.61 inches] ( without terminal block )( w x h x d ) / 560g max ( without cover ) cooling method convection * 6 * 1 measured by 20mhz oscilloscope or ripple-noise meter(equivalent to keisoku-giken :rm101). * 2 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c . * 3 applicable when remote on/off(optional) is added. rc is insulated with input, output and fg. * 4 derating is required. * 5 please contact us about safety approvals for the model with option. * 6 please contact us about class c. * parallel operation with other model is not possible. * derating is required when operated with cover. * a sound may occur from power supply at peak loading. pba150f ac-dc power supplies enclosed type pb a 150 f -5 - o ordering information 1 series name 2 single output 3 output wattage 4 universal input 5 output voltage 6 optional * 5 c :with coating g :low leakage current (0.15ma max / acin 240v) e :low leakage current and emi class a (0.5ma max / acin 240v) t :vertical terminal block j :connector type (only -12,-15,-24,-36,-48) r :with remote on/off n :with cover (only 24v ul508 is acquired) n1 :with din rail v :output voltage setting potentiometer external- ly r 123456 pba/pbw pba/pbw-14 recommended emi/emc filter nac-06-472 high voltage pulse noise type : nap series low leakage current type : nam series * the emi/emc filter is recommended * to connect with several devices. cover is optional
pba150f 9 93 34 19 (13.5) 168 58.5 37.5 78 0.5 2-m3 2-m3 tb1 m4 +v +v -v -v ac(l) ac(n) a 139.5 0.5 10 8.6 (81) (14.5) (20.5) [0.81] [0.57] [0.53] [6.61] [3.07] [5.49] [0.35] [2.3] [0.94] [3.19] [1.48] [0.75] [1.34] [3.66] [0.02] [0.34] [0.39] [0.39] [0.14] (11.5) [0.45] (24) (10) ? tolerance : 1 [ 0.04] ? weight : 560g max (without cover) ? keep drawing current per pin below 20a for tb1. ? pcb material/thickness : cem3 / 1.6mm [0.06] ? chassis material : aluminum ? dimensions in mm, [ ]= inches ? mounting torque : 0.49n ? m(5kgf ? cm)max ? mounting torque : m4:1.6n ? m(16.9kgf ? cm)max name plate point a terminal cover mounting hole mounting hole voltage adjust led ? external size of option t,j,r,n,n1,v and k is different from standard model and refer to 7 option of instruction manual for de tails. 0.5 3.5 cn4 connector for remote sensing (option : only -3r3, -5) cn3 connector for remote on/off (option) cover (option) fg( ) ? please connect safety ground to fg terminal on the unit. 1 2 pin no. contents 1 2 rc(+) rc(-) cn3 option (mfr : j.s.t.) connector type model b2b-xh-a mating connector (terminal) xhp-2 bxh-001t-p0.6 or sxh-001t-p0.6 barrier strip type () pba/pbw pba/pbw-15 pba150f block diagram fg dc out ac in 85 - 264v rc e 250v4a inrush current limit rectifier and filter control transformer control over voltage protection noise filter rectifier and filter inverter fuse rectifier current sensing booster inducter inverter control current sensing external source option external view

▲Up To Search▲

Price & Availability of PBA75F-24

	To Download PBA75F-24 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .